Optional Mounting Information.

No. 4-40 internally threaded holes at 4 locations in both front and rear faces.
This mounting style is supplied unless otherwise specified.
Note: On 1" O.D. & 1-1/4" O.D. models, remove cover retaining screws & use these
threaded holes when mounting to the cover side.

Click the back button on your browser to return to previous page.

CBB - Thru clearance holes with C'bores in the body for No. 4-40 I.S.H.C.S. at 4 locations.
Note: On 1" O.D. & 1-1/4" O.D. models, the cover is a loose part and is retained with the mounting screws.

Click the back button on your browser to return to previous page.

FL - This cover is larger for flange mounting to either side.
Clearance holes for 4-40 screws at four locations.

Click the back button on your browser to return to previous page.

T - Mounting directly to user's structure provides lowest overall height.
This mounting style is supplied with a face seal but without a cover plate.
Surface finish of the mounting structure should be 125 microinches or better.
Internal threads are NO. 4-40 at four locations.

Click the back button on your browser to return to previous page.

TC - Alternate mounting to user's structure to provide a minimum overall height.
This mounting style is supplied with a face seal but without a coverplate.
Surface finish of the mounting structure should be 125 microinches or better.
Clearance holes with C'bores are in the body for NO. 4-40 I.S.H.C.S. at four locations.

Click the back button on your browser to return to previous page.