Index Page Mack Corp. Home Previous Page Next Page Wall Chart Click robot for printer friendly version
Data Sheet 9714 Page 23

 

SHORT STROKE PNEUMATIC CYLINDERS, LO-PROfile® SERIES A-EP-PM
Single Acting - Spring Retracting - Single Ended Pistons - End Ported - Pocket Mounted




SPECIFICATIONS:
Service: Plant Air
M.O.P: 300 PSI
Temp: -40 to +250 deg. F		 Materials:
Body: Aluminum Alloy
Covers: Aluminum Alloy
Piston: Aluminum Alloy		 Springs: Music Wire or St. Stl.
Seals: Buna "N" O-Rings
Fasteners: Alloy Steel


Basic
Part
No. 



O.D.
A 


Bolt
Circle
B 


Rod
Dia.
C 


Boss
Dia.
D 


Boss
Length
E 


Thd.
F


Wr.
flats
G 



Length
H 



Depth
J 


Off
Set
K



Ream
L



Width
M



Width
N


Piston
O.D.
(IN)


Piston
Area
(Sq.In.)
Nom. Force (lbs) = Pressure (psi) times Area (sq. in.)

NOTES: Dimensions are nominal in U.S. Customary units. Metric versions are dimensionally equivalent except for conversion in mounting details where fasteners, threads, clearance holes & counter-bores are to metric standards. To see a table of U.S. Customary to Metric fastener conversion, click here . There is no added cost for this metric modification.
An air/oil mist unit is recommended for internal lubrication. Where such units are not practical, SERVICE KITS including seals and factory approved lube are available.
Cylinders may also be used in low pressure hydraulic service.
Wrench flats may not be necessary if cylinders can be pressurized in the retracted or extended position while tightening the rod joint. Inquiries regarding modification to BASIC CYLINDERS are always welcome.

Table 1

Part No.

E
6007-1(.100) thru -3(.300)
6008-1(.100) thru -3(.300)
6007-4(.400) thru -6(.600)
6008-4(.400) thru -6(.600)
6007-7(.700) thru -10(1.000)
6008-7(.700) thru -10(1.000)		 0.231
0.231
0.381
0.381
0.572
0.572




Index Page Mack Corp. Home Previous Page Next Page Wall Chart Click robot for printer friendly version

To request a quote for a unit on this page, please fill out the following form and submit.

 

REQUIRED ENTRIES

US Standard
Metric

Material:
Default (see above specifications)
S - Stainless Steel Piston
SS - All Stainless Steel

1) Please enter the BASIC PART NO:

2)PISTON TRAVEL
US Standard (shown in 1/10 inch increments, maximum 1.000 in. for spring retracting cylinders.)
Metric (shown in 2.5mm increments, maximum 25.0mm. for spring retracting cylinders.)

 

OPTIONAL ENTRIES

3) MOUNTING STYLE:

FR- Internally threaded holes at 4 locations in both front & rear faces.
 FL- Cover is larger for flange mounting.
 TC- A face seal is furnished for sealing between the structure and cylinder body.
Clearance holes with counterbores for #4-40 internal socket head cap screws are in the body at four locations.

 

 

4)ROD ENDS:
ITW - Internal Threads with Wrench Flats
 ETW - External Threads with Wrench Flats
 SR - Slotted Rod End
 RL - Rod End with Lug

 

 

5) O-Ring Option:

Default (Buna "N" O-rings, -40ºF. To +250ºF.)
V - Viton "O"rings (-15ºF. To +400º F.)

 

 

6) Quantity:

 

 

7) Customer Information

Name
Title
Company
Address
City
State/Province
Country 
Zip Code
Telephone

Fax
Email


Comments


Please check box before pressing SUBMIT.

Mack Corp. Home

 

 

 

 

Data Sheet 9714
Page 23
Index Page Mack Corp. Home Previous Page Next Page Wall Chart Click robot for printer friendly version

 


Copyright Information Privacy Statement Warranty
© 2000 Mack Corporation