---

Index Page

Mack Corp. Home

Previous Page

Next Page

Wall Chart

Click robot for printer friendly page

---

Data Sheet 9106-LS Page 6

NOTES: Dimensions are nominal in U.S. Customary units. Metric versions are dimensionally equivalent except for conversion in mounting details where fasteners, threads, clearance holes & counter-bores are to metric standards. To see a table of U.S. Customary to Metric fastener conversion, please click here . There is no added cost for this metric modification. Spring force in basic cylinders is sufficient to fully retract pistons. Consult factory if higher spring force is required. All inquiries regarding modifications to standard cylinders are welcome.

Basic Part No.  O.D. A   Bolt Circle B  Rod Dia. C   Boss Dia. D  Thd. E No. F Thd. G Wrench Flats H Boss Length J  Deg. X Piston Dia. (IN) Piston Area (SQ. IN.) Nom. Force (lbs) = Pressure (psi) times Area (sq. in.) SPECIFICATIONS: Service: Hydraulic Oil M.O.P: 1500 PSI Temp: -40 to +200 deg. F Materials: Body: Stainless Steel Cover: Stainless Steel Piston: Stainless Steel  Bushings: Sintered Bronze Fasteners: Alloy Steel Seal: "O" Ring Springs: Oil Tempered Steel Wire

To request a quote for a unit on this page, please fill out the following form and submit.

REQUIRED ENTRIES

US Standard Metric

1) Please enter the BASIC PART NO:

2) PISTON TRAVEL
US Standard Click Here 1 (0.100) 2 (0.200) 3 (0.300) 4 (0.400) 5 (0.500) 6 (0.600) 7 (0.700) 8 (0.800) 9 (0.900) 10 (1.000) (shown in 1/10 inch increments, maximum 1.000 inch for spring retract cylinders.)
Metric Click Here 2.5mm 5.0mm 7.5mm 10.0mm 12.5mm 15.0mm 17.5mm 20.0mm 22.5mm 25.0mm (shown in 2.5mm increments, maximum 25.0mm for spring retract cylinders.)

OPTIONAL ENTRIES

3) MOUNTING STYLE: Default (see above drawing) CL - clearance holes for thru bolts of the size identified as "E". CBS - counter-bores in the cover on the side with the spring chamber - for internal socket head cap screws shown as "E". CBO - counter-bores in the cover on the side opposite the spring chamber - for internal socket head cap screws of size shown as "E".

CL - Clearance holes for through bolts

CBS -Clearance holes with counter bores on the same side as the spring chamber.

CBO - Clearance holes with counter bores on the opposite side as the spring chamber.

4)ROD ENDS: Default (see above drawing) ITW - Internal Threads with Wrench flats. ETW - External Threads with Wrench flats.

Internal Threads with Wrench flats (ITW)

External Threads with Wrench flats (ETW)

Note: Higher spring force may be required for retraction where additional load is attached to threaded rod ends.

5) PORTS:
Default (1/8 NPTF) U.S.A. - SAE-4 (7/16-20 Thd.) Straight thread with ""O" ring sealing. BRITISH - 1/8-28 BSPT port. Tapered thread sealing. BRITISH - 1/8-28 BSPP port. Straight thread with "O" ring sealing. METRIC - M10 X 1 port per ISO 6149. Straight thread with captive "O" ring sealing.

6) Quantity:

7) Customer Information

Name
Title
Company
Address
City
State/Province
Country
Zip Code
Telephone

Fax
Email

Comments

Data Sheet 9106-LS
Page 6

---

Index Page

Mack Corp. Home

Previous Page

Next Page

Wall Chart

Click robot for printer friendly page

---

Copyright Information

Privacy Statement

Warranty

© 2000 Mack Corporation