---

Index Page

Mack Corp. Home

Previous Page

Next Page

Wall Chart

Click robot for printer friendly page

---

Data Sheet 9105-LS Page 5

NOTES: Dimensions are nominal in U.S. Customary units. Covers may be oriented relative to each other to offset port locations in increments of 180 deg. on 1.500" thru 2.125" O.D. cylinders and in increments of 120 deg. on 2.250" thru 2.500" cylinders. Ports are offset to avoid fitting interference on cylinders with 1/10 (0.100) travel. Metric versions are dimensionally equivalent except for conversion in mounting details where fasteners, threads, clearance holes & counter-bores are to metric standards. To see a table of U.S. Customary to Metric fastener conversion please click here . There is no added cost for this metric modification. All inquiries regarding modifications to standard cylinders are welcome.

Basic Part No.  O.D. A  Bolt Circle B  Rod Dia. C  Deg. D  Hole E  Thd. F  No. G  Piston Dia. (IN) Net Piston Area (SQ. IN.) Nom. Force (lbs) = Pressure (psi) times Area (sq. in.)

SPECIFICATIONS: Service: Hydraulic Oil M.O.P: 1500 PSI Temp: -40 to +200 deg. F Materials: Body: Bearing Bronze Cover: Bearing Bronze Piston: Stainless Steel Fasteners: Alloy Steel Piston Seal: "O" Ring Rod Seals: Lip Style

To request a quote for a unit on this page, please fill out the following form and submit.

REQUIRED ENTRIES:

US Standard Metric

Cylinder Material: Default (see above specification) All Stainless Steel

Temperature: Default (see above specification) High Teperature (-40 To +275 deg. F.)

1) Please enter the BASIC PART NO:

2)PISTON TRAVEL
US Standard Click Here 1 (0.100) 2 (0.200) 3 (0.300) 4 (0.400) 5 (0.500) 6 (0.600) 7 (0.700) 8 (0.800) 9 (0.900) 10 (1.000) 11 (1.100) 12 (1.200) 13 (1.300) 14 (1.400) 15 (1.500) 16 (1.600) 17 (1.700) 18 (1.800) 19 (1.900) 20 (2.000) 21 (2.100) 22 (2.200) 23 (2.300) 24 (2.400) 25 (2.500) 26 (2.600) 27 (2.700) 28 (2.800) 29 (2.900) 30 (3.000) 31 (3.100) 32 (3.200) 33 (3.300) 34 (3.400) 35 (3.500) 36 (3.600) 37 (3.700) 38 (3.800) 39 (3.900) 40 (4.000) OTHER (shown in 1/10 inch increments, maximum 4.000 in.)
Metric Click Here 2.5mm 5.0mm 7.5mm 10.0mm 12.5mm 15.0mm 17.5mm 20.0mm 22.5mm 25.0mm 27.5mm 30.0mm 32.5mm 35.0mm 37.5mm 40.0mm 42.5mm 45.0mm 47.5mm 50.0mm 52.5mm 55.0mm 57.5mm 60.0mm 62.5mm 65.0mm 67.5mm 70.0mm 72.5mm 75.0mm 77.5mm 80.0mm 82.5mm 85.0mm 87.5mm 90.0mm 92.5mm 95.0mm 97.5mm 100.0mm (shown in 2.5mm increments, maximum 100.0mm.)

OPTIONAL ENTRIES:

3) MOUNTING STYLE:
Default (see above drawing) CL - clearance holes for thru bolts of the size identified as "F". CB1 - clearance holes with counter-bores on cover side #1 for internal socket head cap screws of the size shown as "F". CB2- clearance holes with counter-bores on cover side #2 for internal socket head cap screws of the size shown as "F".

4) ROD ENDS: Thru hole pistons are normally supplied without wrench flats. Please consult the factory if this or other modification is required.

5) FITTINGS:
NONE 37 - fittings supplied for 37 degree flared 1/8 O.D. metal tube or flexible hose. (Reference-SAE-2)

6) Quantity:

7) Customer Information

Name
Title
Company
Address
City
State/Province
Country
Zip Code
Telephone

Fax
Email

Comments

Data Sheet 9105-LS
Page 5

---

Index Page

Mack Corp. Home

Previous Page

Next Page

Wall Chart

Click robot for printer friendly page

---

Copyright Information

Privacy Statement

Warranty

© 2000 Mack Corporation